CCTV Tech Support
Quick Start Quide
PoE Kits Complete Manual
Use this manual if you purchased our Zxtech Complete CCTV PoE System, which includes both the camera and recorder. If you purchased an individual camera or NVR and do not intend to use them as part of the complete system, refer to the following Quick Start Guide instead.
Wireless Kits Complete Manual
Use this manual if you purchased our Zxtech Complete CCTV Wireless System, which includes both the camera and recorder. If you purchased an individual camera or NVR and do not intend to use them as part of the complete system, refer to the following Quick Start Guide instead.
PoE Camera QSG
Please refer to the COMPLETE MANUAL if you purchased the complete system. Use this quick start guide only if you bought the camera individually and do not plan to use it as part of a complete system.
NVR QSG
Please refer to the COMPLETE MANUAL if you purchased the complete system. Use this quick start guide only if you bought the NVR individually and do not plan to use it as part of a complete system.
Wireless Camera QSG
Please refer to the COMPLETE MANUAL if you purchased the complete system. Use this quick start guide only if you bought the camera individually.
Wireless PTZ Camera Patrol & Tracking Quick Start Guide
PoE CCTV Kits
- If you bought any Zxtech Complete PoE IP CCTV Kits;
- If your product code start with RX, UX, FP, GF, TM, QU, OE, IX, FE;
- If your above product was purchased after 2018;
Tools, Software and Apps
Guides
Email Motion Alert Setup Guide
PoE NVR Interface Quick Setup Guide
PoE Power Management Must Read
DHCP v.s. Fixed IP (Solves 99% IP System Connection Issue)
CCTV Microphone Connection Guide
Camera Viewing Angle & Distance Guide
CCTV Camera Connections Explained
How to Avoid Network Cabling by Using Data over Power Plug
Default username: admin
Default password: admin or 12345
Wireless CCTV Kits
- 5MP Tropox Kits Support:
- If you bought an Zxtech 5MP Tropx Wireless CCTV system;
- If your product code start with WF;
Tools, Software and Apps
IP Search Tool for Camera
Download IP Search Tool for Windows
Download IP Search Tool for Mac
IP Search Tool for Recorder
Download IP Search Tool for Windows
Download IP Search Tool for Mac
Doanload iVMS Destop App for Windows
Download Manual of iVMS Destop App for Mac
Download iVMS Destop App for Mac
Download Manual for P2P Client for Windows
Download P2P Client for Windows
Download Manual for Local Client for Windows
Download Local Client for Windows
iPhone & Android App: BitVisionDownload IP Search Tool for Windows
Download IP Search Tool for Mac
Doanload iVMS Destop App for Windows
Download Manual of iVMS Destop App for Mac
Download iVMS Destop App for Mac
iPhone & Android App: BitVision
Guides
How to Step up Tropox CCTV Kits
Email Motion Alert Setup Guide
NVR Interface Quick Setup Guide
Tropox Camera Quick Setup Guide
DHCP v.s. Fixed IP (Solves 99% IP System Connection Issue)
Camera Viewing Angle & Distance Guide
CCTV Camera Connections Explained
Default username: admin
Default password: admin or 12345
PoE CCTV Cameras
- If you bought Any Zxtech IP PoE CCTV Cameras;
- If you bought Any Zxtech Wired IP Cameras;
- Product code should start with MCI;
Tools, Software and Apps
Guides
DHCP v.s. Fixed IP (Solves 99% IP System Connection Issue)
PoE Power Management Must Read
CCTV Camera Connections Explained
CCTV Microphone Connection Guide
Camera Viewing Angle & Distance Guide
How to Avoid Network Cabling by Using Data over Power Plug
Default username: admin
Default password: admin or 12345
Wireless CCTV Cameras
- If you bought an Zxtech Tropx Wireless CCTV Cameras;
- Suitable for product code: MCPWD52N, MCWBW52A, MCI28K4B, MCI28K5B, MCI28K6B, MCI28K3B;
Tools, Software and Apps
Guides
Tropox Camera Quick Setup Guide
DHCP v.s. Fixed IP (Solves 99% IP System Connection Issue)
CCTV Camera Connections Explained
CCTV Microphone Connection Guide
Camera Viewing Angle & Distance Guide
Default username: admin
Default password: admin or 12345
User Manuals
This section provides support for the legacy CCTV systems you've previously purchased from us. We are committed to supporting your system long-term, even if it's no longer under warranty. While we cannot guarantee support for very old systems, we will always do our best to keep all the help resources available online.
Zxtech Recorder Interface 5.0 User Manual
Onvif
Onyx, Mini, Graphite, Octagon, Navy NVR/HVR & IP Camera Manuals (Legacy)
Onyx NVR user Manual (firmware version 9)
Onyx NVR user Manual (firmware version 5)
Onyx NVR user Manual (firmware version 7)
XVR user Manual (firmware version 7)
XVR kits Quick Operation Guide (firmware version 7)
NVR User Manual (version 5 and 6)
NVR User Manual - Web Browser (version 5 and 6)
NVR User Manual - CMS software (version 5 and 6)
Motion detection - setup guide (firmware version 5 and 6)
Motion Detection - setup guide (firmware version 7 and 8)
Zxtech Range - How To Add Device To VMS Lite By Local IP Address
Zxtech Range - How To Add Device To VMS Lite By Serial Number
Zxtech Range - Zxtech IP Camera - First Login from Internet Explorer Browser
Zxtech Range - Zxtech IP Camera - How to setup IP Camera using MAC
Wireless IP Camera Manuals (Legacy)
User Manual (Tropox and Stratox IPC)
User Manual (Tropox and Stratox IPC v.11)
Quick Installation Guide (Tropox and Stratox IPC)
Tropox / Stratox camera setup video
Cloud line wireless IPC manual
Cloud line camera setup video
Tropox - How To Change Wi-Fi Settings After Changing Router-IP
Zxtech IP Camera - How To Setup Wi-Fi (Cloud Line Cameras)
Green Range Manuals (Legacy)
Hikvision Range Manuals (Legacy)
Hikvision NVR User Manual (series DS- 7600 / 7700 / 8600 NI-E)
Hikvision NVR Quick Operation Guide (series DS- 7600 / 7700 / 8600 NI-E)
2MP IP Cameras (Legacy)
User Manual
Legacy Analogy Recorder
- If you bought an Zxtech Onyx, Navy and Mini NVR
- If your product code start with MN;
Tools, Software and Apps
Guides
DHCP v.s. Fixed IP (Solves 99% DVR Network Connection Issue)
Default username: admin
Default password: admin or 12345
Legacy Analog Camera
- If you bought Any Zxtech AHD and Analog CCTV Cameras;
- Product code should start with MCD or MCB;
FAQ for Legacy Products
Here including some of the frequency asked questions for our previous sold product which you might find it useful.
Q&A for Legacy Product
Q. How do I get the Zxtech CCTV system on my phone?
Click here to see how you add the CCTV system to your android or IOS device.
Q. What is the Analog Camera controller for?
Click Here for the full article on analog camera modes
Q. Why does the recorder keep restarting or not load?
This is a problem that occurs when there is a hard drive inside. More information Here
The recorder does not contain a HDD/hard drive, we would recommend contacting our techsupport@domar.com for assistance.
Q. Do I need a firmware update?
Please read the article here about firmware updates.
Q. Why do my Zxtech wireless cameras keep disconnecting?
You can review the article here as to why wireless might not be working for you.
Q. How do I configure my Zxtech wireless cloud cameras?
You can follow the guide we have Here
Q. Can I use Wireless and cabled cameras?
Wireless cameras can be a good solution for some situations and circumstances, but this doesn’t mean you can’t use wired cameras.
Wireless cameras and wired cameras both operate through the network using an IP address. You can also use an XVR with analog cameras and wireless cameras. You can also email us at sales@domaroslutions.com or techsupport@domarolsutions.com for further information.
Q. How do I configure my Zxtech Tropox wireless cameras?
You can review the content here to see how it's done.
Q. What is resolution?
Resolution is the key indicator for the quality of the system. You may see systems with 2MP, 2.4MP, 5MP, 8MP and 12MP. These are all resolution indicators for the quality of the image.
Higher resolution does not mean you can see furtherin the image, but it does mean better quality and clarity with the picture. This is key for identifying people and details in footage and so the higher resolution means better identification.
When using digital zoom of the system, you will not lose as much detail. This means when enhancing the image, you won’t lose as much as quality or clarity.
Q. What does CCTV Stand for?
Click here to see all about CCTV.
Q. What lens should I choose when buying a camera.
Please click here to see advices for cameras lens.
Q. What hard drive should I choose when buying a recorder.
Please click here to see advices for HDD sizes.
Q. How to connect Hikvision IP cameras to Zxtech NVR recorder
A. Please click here to see the solutions.
Q. How to connect a Non-PoE Camera
A. Click here to read.
Q. How can you playback recorded files?
A. Menu > Playback > Select a date you wish to playback >search > then select a time.
Q. How do you restore the DVR to default settings?
A. Menu > Advanced > Maintance > Default Settings.
Q.My Hikvision DVR is just bleeping?
A. Please ensure that the Hikvision is set to "Pal", to do this please go to the menu and click on configurations.
Q. Which application should I use?
A. We recommend you visit the Support section /Mobile application on our website to download the correct application for your recorder or camera. For Hikvision we recommend you use their own application search "Hik-connect" in your app store.
Q.My DVR works just on the local network?
A. Please ensure that you have entered the correct details in the network settings of the DVR, such as the default gateway.
Q. How do you set-up motion detection?
Please follow the link here to the article for the process.
Q. How do you set-up email?
A. You need to ensure that you have the correct SMTP server setting for your email provider. Then enter them into the DVR.
Q. Can the system be used indoor and outdoor?
A. Yes, we have outdoor and indoor cameras.
Q. How to connect the DVR to my television?
A. To connect the DVR to television you need to have a VGA port on your tv and a VGA cable. Once you have the cable you plug it into the VGA port on the dvr and then plug the other end into the port on the TV.
Q. Why can I not hear audio on my DVR?
A. In order to hear audio please make sure that audio is enabled, you then have to click on a channel so it is the full screen you then will be able to hear audio. If you wish to hear the audio when playing back files you also have to click on a channel to make it full screen.
Q. How to connect the mic to the DVR?
A. The microphones need to be connected into the audio input port these are under the camera channels. The microphone would only work with a channel that is being used e.g. put the microphone in channel 1 with the camera on channel 1.
Q. How to connect the camera to the DVR?
A. Using the BNC cables, connect one end to the camera than the other to the DVR. You then have to power the camera using the power adaptor.
Q. Does the camera work on night vision?
A. Yes, all our cameras have night vision.
Q. Does the DVR overwrite once the drive is full?
A. Yes, by default the DVR overwrites the data starting from the oldest files. This function can also disable this function.
Q. I get an error message saying “no route found” what does it mean?
A. You are not using the admin password that you have set-up on the DVR, you need to restart the DVR and enter the admin password you set-up.
Q. Do you have port forwarding guides?
A. Click here to see the Ports for different range of CCTV recorders. Please click here to see more information about Ports & Mobile Software Suggestions.
Q. What's the advice for CCTV camera installations.
A. Click here to see the advice for camera installations.
Q. What's the general Wifi signal guidance?
A. Click here to see the advice for Wifi Signal.
Q. Why is my recorder become hot?
Check here for tips to cue hot and noisy recorder.
Q. How to update firmware?
A. Please click here for firmware update guide.
Contact Us
Still not sure?
Drop us a message and our customer service team will respond within the next 24 business hours. Typically, during regular working hours, you can expect a reply within 1-2 hours.